Le samedi 27 décembre 2008 à 00:06 +0100, Palo S. a écrit : > > I set it to 3600 in gconf > > (sip:registrar_registration_timeout as well as in > > accounts_list) but it seems that both settings are > > ignored? The log still says 36000. Is there a > > separate settings at ekiga.net? Is there a way > > for me to set it? > > > > Sorry for my monologue... It turned out that the > gconf settings were applied with delay. I tried both > 3600 and 600 but the problem persists with the > same behaviour - all communication is halted after > some time. > > The network consists of Zyxel ADSL modem bridged to > WRT54GL router running Tomato firmware. Using or not > using port forwarding does not play a role either. > Full log using registration time of 600 is here: > ftp://quacka.no-ip.org/pub/ekiga.log.7z > (.tgz is available at the same location if preferred) > > It could still be a NAT issue but it would be bit weird > because there is a SIP hardphone connected to the same > router and it works without any problems with two SIP > (non-Ekiga) accounts... so I really don\'t know what is > going on here at the moment!
Indeed, the problem is on Ekiga's side. At some point, it does not refresh the registration. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ Be IP : http://www.beip.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:[email protected] _______________________________________________ ekiga-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/ekiga-list
