>
> Wilfred van den Assem wrote:
> > Hello,
> >
> >
> >
> > Ive build ekige just fine and it runs fine but when I receive a call,
> > there is no ringing sound. This is what I get from ekige -d 4:
> >
> >
> >
> > 2010/01/24 13:47:07.412 1:39.594 CallSetup:0x75240910
> > OpalUDP Setting interface to 192.168.1.101%eth0
> >
> > 2010/01/24 13:47:07.412 1:39.594 CallSetup:0x75240910
> > OpalCon SetPhase from SetUpPhase to AlertingPhase for
> > Call[C193943361]-EP<sip>[c8f4d53f-5407-df11-8ea5-001a4d4c2307]
> >
> > 2010/01/24 13:47:07.413 1:39.594 CallSetup:0x75240910
> > OpalCon OnSetUpConnectionCall[C193943361]-EP<pc>[P48b71de32]
> >
> > 2010/01/24 13:47:07.413 1:39.594 CallSetup:0x75240910
> > OpalEP OnSetUpConnection Call[C193943361]-EP<pc>[P48b71de32]
> >
> > 2010/01/24 13:47:07.413 1:39.594 CallSetup:0x75240910
> > PTLib Thread ended: name="CallSetup:0x75240910", real=0.002,
> > kernel=0.000 (0%), user=0.000 (0%), both=0.000 (0%)
> >
> > 2010/01/24 13:47:07.498 1:39.679
> > AEScheduler Adding Event incoming_call_sound 4000/256 to queue
> >
> > 2010/01/24 13:47:07.498 1:39.679 AudioEvent...0x95ab9910
> > AEScheduler Checking pending list with 1 elements
> >
> > 2010/01/24 13:47:07.498 1:39.679 AudioEvent...0x95ab9910
> > AEScheduler Trying to load /usr/local/share/sounds/ekiga/ring.wav for
> > event incoming_call_sound
> >
> > 2010/01/24 13:47:07.498 1:39.679 AudioEvent...0x95ab9910
> > AEScheduler Trying to load
> > /usr/share/sounds/ekiga/usr/local/share/sounds/ekiga/ring.wav for event
> > incoming_call_sound
> >
> > 2010/01/24 13:47:08.800 1:40.981 Housekeeper:0x80c80910
> > PWLib File handle low water mark set: 54 PUDPSocket
> >
> > 2010/01/24 13:47:11.498 1:43.680 AudioEvent...0x95ab9910
> > AEScheduler Checking pending list with 1 elements
> >
> > 2010/01/24 13:47:11.498 1:43.680 AudioEvent...0x95ab9910
> > AEScheduler Trying to load /usr/local/share/sounds/ekiga/ring.wav for
> > event incoming_call_sound
> >
> > 2010/01/24 13:47:11.499 1:43.680 AudioEvent...0x95ab9910
> > AEScheduler Trying to load
> > /usr/share/sounds/ekiga/usr/local/share/sounds/ekiga/ring.wav for event
> > incoming_call_sound
> >
> > 2010/01/24 13:47:15.498 1:47.679 AudioEvent...0x95ab9910
> > AEScheduler Checking pending list with 1 elements
> >
> > 2010/01/24 13:47:15.498 1:47.680 AudioEvent...0x95ab9910
> > AEScheduler Trying to load /usr/local/share/sounds/ekiga/ring.wav for
> > event incoming_call_sound
> >
> > 2010/01/24 13:47:15.498 1:47.680 AudioEvent...0x95ab9910
> > AEScheduler Trying to load
> > /usr/share/sounds/ekiga/usr/local/share/sounds/ekiga/ring.wav for event
> > incoming_call_sound
> >
> > 2010/01/24 13:47:19.498 1:51.679 AudioEvent...0x95ab9910
> > AEScheduler Checking pending list with 1 elements
> >
> > 2010/01/24 13:47:19.498 1:51.680 AudioEvent...0x95ab9910
> > AEScheduler Trying to load /usr/local/share/sounds/ekiga/ring.wav for
> > event incoming_call_sound
> >
> > 2010/01/24 13:47:19.498 1:51.680 AudioEvent...0x95ab9910
> > AEScheduler Trying to load
> > /usr/share/sounds/ekiga/usr/local/share/sounds/ekiga/ring.wav for event
> > incoming_call_sound
> >
> >
> >
> > I see Ekiga is searching in many places but not in
> > /usr/share/sounds/ekiga/*
> >
> > And thats the place where are the sounds:
> >
> >
> >
> > ls /usr/share/sounds/ekiga
> >
> > busytone.wav dialtone.wav newmessage.wav ring.wav voicemail.wav
> >
> >
> >
> > This is the build part of my SPEC file:
> >
> >
> >
> > ./autogen.sh \
> >
> > --prefix=%{_prefix} \
> >
> > --with-boost-libdir=/usr/lib64 \
> >
> > --enable-gstreamer \
> >
> > --enable-dbus \
> >
> > CFLAGS="-fexceptions" CXXFLAGS="-fexceptions"
> >
> >
> >
> > What can I do to let Ekiga search in the right folder?
> >
> >
> >
> >
> > What's the value of _prefix ?
> >
> > The default value is /usr on my opensuse 11.2 box.
> > I build many other rpm for me and for my family and always use
> > --prefix=%{_prefix} in the SPEC file.
> > The executable is installed in /usr/bin/ and the libs are in
> > /usr/lib64/ekiga/
> > In /usr/local there is nothing installed.
>
> Try using --prefix=/usr instead of --prefix=%{_prefix} .
>
Did it but makes no difference. When building the RPM it says
Installing into prefix : /usr
_________________________________________________________________
25GB gratis online harde schijf
http://skydrive.live.com_______________________________________________
ekiga-list mailing list
[email protected]
http://mail.gnome.org/mailman/listinfo/ekiga-list
