ekiga -d 4 output is posted here. <http://www.4shared.com/document/RF_HTmAa/output.html> Thanks again for your help!
On 08/25/2011 07:28 AM, [email protected] wrote: >> Hello, >> > >> > I've just installed Ekiga 3.2.7 on OpenSuse 11.4, 2.6.37.1-1.2-desktop, >> > on a Thinkpad T410 (single audio combo jack). >> > >> > I've followed the Audio Setup page, set all audio devices to the Default >> > (PTLIB/ALSA) (and later everything else just to check), I confirmed that >> > my ALSA configuration was working properly as both echo tests functioned >> > flawlessly: >> > >> > $ arecord -D plughw:0,0 -c 1 -r 8000 -f S16_LE - | aplay -D plughw:0,0 >> > -c 1 -r 8000 -f S16_LE - >> > $ arecord -D plughw:0,0 -c 1 -r 16000 -f S16_LE - | aplay -D plughw:0,0 >> > -c 1 -r 16000 -f S16_LE - >> > >> > But I am unable to perform an echo test within Ekiga. I can receive >> > calls and hear the audio, but the microphone will not pick anything up. >> > Looking at other archives, I didn't see a solution that worked for me. >> > >> > More info that might be useful: >> > $ alsamixer >> > tells me that Master and Capture are both 100% >> > >> > $/sbin/lspci | grep Aud >> > 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset >> > High Definition Audio (rev 06) >> > >> > The codecs are set to their defaults: Speex, PCMU, PCMA, silence >> > detection and echo cancelation are not enabled. >> > >> > The same headpiece performs under skype. >> > >> > I'm happy to send any other information. > Send us the -d 4 output when calling [email protected] and when you speak > you do not ehar yourself.
_______________________________________________ ekiga-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/ekiga-list
