I'll check it out. Thanks -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Eugen Dedu Sent: Wednesday, September 21, 2011 10:26 AM To: Ekiga mailing list Subject: Re: [Ekiga-list] h323
On 21/09/11 17:21, Mike Westman wrote: > OK, I was able to get it working. I had to disable every network adapter in > my computer except for the one that was actively providing internet access. There are many chances that your problem be solved in the current unstable branch. (Something with Contact field.) > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Eugen Dedu > Sent: Wednesday, September 21, 2011 10:20 AM > To: Ekiga mailing list > Subject: Re: [Ekiga-list] h323 > > On 15/09/11 23:47, Mike Westman wrote: >> That didn't help. I don't get any indication at the far end that a >> connection attempt is being made. I also can't receive a connection. Is >> there logging that I can turn on to see if anything is happening? > > Yes, -d 4 output gives much information about what is going on. > >> From: Thierry Simonnet [mailto:[email protected]] >> Sent: Thursday, September 15, 2011 8:46 AM >> To: Ekiga mailing list >> Cc: Mike Westman >> Subject: Re: [Ekiga-list] h323 >> >> Could you make a try : only select H261 video codec. It seems to me >> that there are compatibility trouble with H263 and H264 codecs with >> Polycom and Tandberg system >> >> Le 15/09/2011 15:41, Mike Westman a écrit : >> Sorry, I should have mentioned that this is on Windows 7 x64. >> Version 3.2.7 >> >> From: [email protected]<mailto:[email protected]> >> [mailto:[email protected]] On Behalf Of Thierry Simonnet >> Sent: Thursday, September 15, 2011 1:53 AM >> To: Ekiga mailing list >> Subject: Re: [Ekiga-list] h323 >> >> I work on 3.3.3 git version and I noticed that there is a trouble with H323. >> It works for Win32 version but not for Linux version. I use and manage >> network and Polycom device for tests (same test environment for Linux and >> win32). >> I will post an ekiga -d 4 file soon. >> >> Best regards >> >> Le 15/09/2011 07:39, Dave Koelmeyer a écrit : >> >> >> On 15 Sep, 2011,at 01:12 AM, Mike >> Westman<[email protected]><mailto:[email protected]> wrote: >> I'm trying to use Ekiga to connect to my company's LiveTime VTC systems. On >> my Mac I can connect to the system's IP address using h323 without any >> problems. When I try using Ekiga the software immediately states that it >> is unable to connect to remote host and replaces the address with sip:. >> >> What am I missing? Thank you. >> >> >> Hi Mike, >> >> When you enter the IP address of your system, be sure to enter it with the >> H323 prefix. For example, this is what you would enter in the Ekiga address >> bar (replace the IP address obviously): >> >> H323:192.168.1.1 >> >> See if that works. >> >> Cheers, >> -- >> Dave Koelmeyer >> http://blog.davekoelmeyer.co.nz<http://blog.davekoelmeyer.co.nz/> > _______________________________________________ > ekiga-list mailing list > [email protected] > http://mail.gnome.org/mailman/listinfo/ekiga-list > _______________________________________________ > ekiga-list mailing list > [email protected] > http://mail.gnome.org/mailman/listinfo/ekiga-list _______________________________________________ ekiga-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/ekiga-list _______________________________________________ ekiga-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/ekiga-list
