On Sun, Aug 18, 2013 at 09:27:04AM -0500, junk_no_spam wrote: > On 08/18/2013 08:34 AM, Csanyi Pal wrote: > >On Sun, Aug 18, 2013 at 06:16:24AM -0500, junk_no_spam wrote: > > >I did that, and run again the voip_ck script. > > Ok, I am glad we're making progress. > > I really would like for you to give me the results of > type rpm
~$ type rpm rpm is /usr/bin/rpm > Now to your problem. > > Looking at the log > RTP UDP 16382 FAILED > > Sent: LAN LAN port 16382 UDP RTP > Received: LAN LAN port 16382 UDP RTP LAN UDP port 16382 UDP RTP is not open > > Would seem to indicate a pc blocking problem. > Not fatal to your ekiga call out problem. > > Same for H.323 TCP 1720 FAILED > I think that is for video conferencing/display > > > Testing WAN 95.85.141.89 ports > STUN UDP 3478 FAILED > > That is fatal for ekiga phone calls and since it passed during the > lan test I have to assume your router is not passing 3478 to the pc. > > I can not remember exact usage of the 50xx ports but pretty sure > it is needed for voip calls. > > > 7070 and 16382 are for RTP, not your basic voip calls. > > 300xx failures are also not needed for voip calls. > > Looking like router firewall problems. > If you are running more than one pc on your lan, I would guess you would > have to set your ekiga pc ip as static and have the router forward > ekiga ports to it. Could be possible to use other features in router > but I have very little experience with routing features. > > Snippet from my fios router follows: > > > H.323 Call Signaling > TCP Any -> 1720 > TCP Any -> 1503 > > > Destination Ports 3478-3479 > UDP Any -> 3478-3479 > > > Destination Ports 5000-5100 > UDP Any -> 5000-5100 > > > Destination Ports 7070,16382 > UDP Any -> 16382 > UDP Any -> 7070 > > > Destination Ports 30000-30010 > TCP Any -> 30000-30010 I edited the Shorewall's rules file on the router/gateway PC Box and now I have there followings: # ekiga DNAT:debug:GM net loc:192.168.10.90 tcp 1720 DNAT:debug:GM net loc:192.168.10.90 tcp 1503 DNAT:debug:GM net loc:192.168.10.90 tcp 30000:30010 DNAT:debug:GM net loc:192.168.10.90 udp 5000:5016 DNAT:debug:GM net loc:192.168.10.90 udp 5020:5023 DNAT:debug:GM net loc:192.168.10.90 udp 5060:5100 DNAT:debug:GM net loc:192.168.10.90 udp 3478:3479 DNAT:debug:GM net loc:192.168.10.90 udp 7070 DNAT:debug:GM net loc:192.168.10.90 udp 16382 I edited the Shorewall's rules file on the desktop PC Box and now I have there followings: # ekiga # http://wiki.ekiga.org/index.php/Ekiga_behind_a_NAT_router # ekiga incomming H.323, Netmeeting ports ACCEPT<>net<--->$FW<--->tcp<--->1720 ACCEPT<>$FW<--->net<--->tcp<--->1720 # ?? ACCEPT<>net<--->$FW<--->tcp<--->1503 ACCEPT<>$FW<--->net<--->tcp<--->1503 # ?? ACCEPT<>net<--->$FW<--->tcp<--->30000:30010 ACCEPT<>$FW<--->net<--->tcp<--->30000:30010 # ?? ACCEPT<>$FW<--->net<--->udp<--->5000:5100 ACCEPT<>net<--->$FW<--->udp<--->5000:5100 # ekiga UDP Through NAT (STUN) ports ACCEPT<>$FW<--->net<--->udp<--->3478:3479 ACCEPT<>net<--->$FW<--->udp<--->3478:3479 # ?? ACCEPT<>net<--->$FW<--->udp<--->7070 ACCEPT<>$FW<--->net<--->udp<--->7070 # ?? ACCEPT<>net<--->$FW<--->udp<--->16382 ACCEPT<>$FW<--->net<--->udp<--->16382 I restarted shorewall firewall on both systems ( gateway and desktop ) but still can't call from Ekiga a phone. I get message in the status line: The remote device is offline. However, I setup Linphone too for DiamondCard service and I can call a phone number from Linphone. > I am going to add fatal/nonfatal to my script. and hopefully get > that rpm test to skip on Debian type installs if you give me the > type rpm > results. ~$ type rpm rpm is /usr/bin/rpm -- Regards from Pal _______________________________________________ ekiga-list mailing list [email protected] https://mail.gnome.org/mailman/listinfo/ekiga-list
