Hi Wolfgang, Yes, I am sure , it is tty1, we have two uart ports on this board , one in the front with D-9pin connector with address 0xef000400 which is Uart1 and second is Uart0(0xef000300) which is at the back of the board through VME connector . In the Uboot ,I have configured it as console 1.
Thanks Rajive Please consider the environment before you print / Antes de imprimir, piense en el medio ambiente Wolfgang Denk <[email protected]> Sent by: [email protected] 06/22/2011 11:49 AM To Rajive Gupta/US/External/BombardierTransport@Transport cc [email protected] Subject Re: [ELDK] Problem in porting linux on VCE405 powerpc board using ELDK-4.2 development environment Dear [email protected], In message <ofc0c11323.2a5cd1ef-on852578b7.0051883a-852578b7.00521...@amer.bombardier.com> you wrote: > > Thanks for quick response , I fixed the kernel bootargs with comma(,) , > but result is still the same. It just stop at the same place. Can you > please suggest some other part where I can dig around to fix this problem. Are you sure that ttyS1 is the correct console port? The normal approach to such problems is to attach a BDI3000 and start gdb for a debug session. As a quick test, you can check if ther eis additional information in the log buffer - either again using the BDI, or using a post-mortem dump in U-Boot (see the FAQ). Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] A morsel of genuine history is a thing so rare as to be always valuable. - Thomas Jefferson _______________________________________________ eldk mailing list [email protected] http://lists.denx.de/mailman/listinfo/eldk _______________________________________________________________________________________________________________ This e-mail communication (and any attachment/s) may contain confidential or privileged information and is intended only for the individual(s) or entity named above and to others who have been specifically authorized to receive it. If you are not the intended recipient, please do not read, copy, use or disclose the contents of this communication to others. Please notify the sender that you have received this e-mail in error by reply e-mail, and delete the e-mail subsequently. Please note that in order to protect the security of our information systems an AntiSPAM solution is in use and will browse through incoming emails. Thank you. _________________________________________________________________________________________________________________ Ce message (ainsi que le(s) fichier(s)), transmis par courriel, peut contenir des renseignements confidentiels ou protégés et est destiné à l?usage exclusif du destinataire ci-dessus. Toute autre personne est, par les présentes, avisée qu?il est strictement interdit de le diffuser, le distribuer ou le reproduire. Si vous l?avez reçu par inadvertance, veuillez nous en aviser et détruire ce message. Veuillez prendre note qu'une solution antipollupostage (AntiSPAM) est utilisée afin d'assurer la sécurité de nos systèmes d'information et qu'elle furètera les courriels entrants. Merci. _________________________________________________________________________________________________________________
_______________________________________________ eldk mailing list [email protected] http://lists.denx.de/mailman/listinfo/eldk
