ELDK-5.0 supports armv7 and armv5t - I do not know if someone else except you tested with v4t...
I known eldk-5.0 supports v7 and v5t, I see a denx faq which said can do this with pre-setting USE_PRIVATE_LIBGCC=yes, I do it, then core dumped happened. that faq link is: http://www.denx.de/wiki/view/ELDK-5/QuestionsAndAnswers#GCC_generates_illega l_opcodes_fo maybe I can try a older version of eldk, I'd like to try eldk-5.0 firstly, I'v downloaded and installed 5.0 already and it work well under my test. I think eldk-5.0 maybe backward compatible before. Thanks for your reply. Best regards, liujun -----邮件原件----- 发件人: Stefano Babic [mailto:[email protected]] 发送时间: 2011-10-08 20:30 收件人: liujun 抄送: [email protected] 主题: Re: [ELDK] help: i got a core dumped while building u-boot-2011.06 use eldk5.0 for armv4t. On 10/08/2011 10:40 AM, liujun wrote: > hi, all > > i got a core dumped while building u-boot-2011.06 for s3c2440a chip > > which is arch v4t use eldk5.0 with USE_PRIVATE_LIBGCC=yes. > > building is ok without USE_PRIVATE_LIBGCC=yes but only got a v5t > > elf u-boot file. > Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: [email protected] ===================================================================== _______________________________________________ eldk mailing list [email protected] http://lists.denx.de/mailman/listinfo/eldk
