Hi Alexej, > I am trying to install linux on my Lite5200 EVB using this manual: > http://emsys.denayer.wenk.be/emcam/Linux_on_MPC5200_(UK).pdf
Ah, 7 year old material ;) > I downloaded ELDK 4.2 ISO and installed the ppc_6xx package which is > correct for my processor (MPC5200) according to > http://www.denx.de/wiki/view/DULG/ELDKSupportedTargetArchitectures . Although we are currently transitioning to ELDK 5.x, this should still work, yes. > Then I just followed the manual: > > $ export CROSS_COMPILE=ppc_82xx- This should really be ppc_6xx but as the one is a symlink to the other, both should work. > $ PATH=$PATH:/<ELDK-dir>/usr/bin:/<ELDK-dir>/bin Did you do an "export PATH"? > I downloaded and installed U-Boot 1.3.2 like it's described on this > manual page: http://www.denx.de/wiki/view/DULG/UBootSources Ah, even older sources :) Lite5200 is supported in current sources, so you should use that[1] - even top of tree fresh from git should work. > and the I tried to compile u-boot: > > $ cd u-boot > $ make Lite5200_LOWBOOT_config > > $ make all > > it said, ppc_8xx-gcc was not found. Sure, because I specified the > CROSS_COMPILE variable as ppc_82xx above. But it doesn't work if I > specify it as ppc_8xx as well. Can I alter a config file so the 'make' > does look for ppc_82xx-gcc instead of ppc_8xx-gcc ? Nope, this is a pilot error, the infrastructure is ok. Just setup PATH and CROSS_COMPILE in the shell from which you call make and be sure to export all of them. > I really appreciate your help, I'm relatively new to embedded linux and > cross compiling. Happy hacking! Cheers Detlev [1] ftp://ftp.denx.de/pub/u-boot/ -- There are two hard things in computer science: cache invalidation, naming things, and off-by-one errors. -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: [email protected] _______________________________________________ eldk mailing list [email protected] http://lists.denx.de/mailman/listinfo/eldk
