Dear Axel Beierlein, please do NOT post the same messages to several mailing lists. And if you think you really must, then please use proper cross-cposting instead of posting several separate messages.
In message <[email protected]> you wrote: > > i have compiled a 3.1.5 Kernel for a TQM5200 Board. > But what i missed is the correct partitioning of the flash after the > boot. Do i have to use another way as with Kernel 2.4.25? This question has nothign to do with the ELDK (and neither with U-Boot); it is stricly Linux related only, and your posting was actually off topic on both lists. You should have sent it to a Linux kernel related mailing list instead (and only there). For the solution, see the reply I sent to your posting on the U-Boot list, i. e. http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/129582/focus=129597 Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] Niklaus Wirth has lamented that, whereas Europeans pronounce his name correctly (Ni-klows Virt), Americans invariably mangle it into (Nick-les Worth). Which is to say that Europeans call him by name, but Americans call him by value. _______________________________________________ eldk mailing list [email protected] http://lists.denx.de/mailman/listinfo/eldk
