hi, i just installed eldk-5.3 for powerpc and started working with it. I am using a mpx8349 board with linux-3.5.0 booted via tftp and using /opt/eldk-5.3/powerpc/rootfs-lsb-sdk via nfs. this is working so far.
Then i tried to mount another directory from my development-machine with the command mount -t nfs 192.168.69.57:/home/dorwig /mnt/net this does not work like it did before with eldk-4.0 after stracing it shows up that the mount systemcall returns EINVAL. what can i do ? Then i went on and tried to compile an application which is using pam. the pam_appl.h used to be in usr/include/security . now there is no such directory in /opt/eldk-5.3/powerpc/sysroots/powerpc-linux/usr/include i found the file in /opt/eldk-5.3/powerpc/rootfs-lsb-sdk/usr/include/security, but this is not the place where the crosscompiler expects it. after copying these files to /opt/eldk-5.3/powerpc/sysroots/powerpc- linux/usr/include/security the compilation succeded until linking the linker was missing libpam and libcrypto there is /opt/eldk-5.3/powerpc/sysroots/powerpc-linux/lib/libcrypto.so.1.0.0 i had to make a symbolic link libcrypto.so -> libcrypto.so.1.0.0 is this normal ? i had to copy libpam* from the rootfs-lsb-sdk/lib to sysroots/powerpc- linux/lib directory to successfully build my application. again, is this mormal ? regards Martin _______________________________________________ eldk mailing list [email protected] http://lists.denx.de/mailman/listinfo/eldk
