Dear Claus, In message <[email protected]> you wrote: > > my goal is to use a LTE modem via USB with the m28evk. > > I have got driver for the LTE card but I am not able to install the > driver direct on the board.
At the moment we use a v3.10.28 kernel in the latest ELDK release (v5.5.2). Have you made sure that your driver source code is complete and is compatible with this kernel version? > I know that I have to crosscompile the dirvers (gobi serial and gob net > drivers) for the system and copy the solution then to the board, or > like this. ... > Is there any description how can I do the cross compilation.? There are many descriptitons how to compile a kernel tree; in the end they boild down to something like: $ export ARCH=arm $ export CROSS_COMPILE=arm-linux-gnueabi- $ export PATH=<path_to_your_cross-tools>:$PATH $ make mrproper $ make m28evk_defconfig : Adjust config to enable your custom drivers $ make menu_config $ make -s -j8 uImage $ make m28evk.dtb > Do I need the eldk for that? Yes, you will need the ELDK cross SDK (or any other cross development environment) to do that. > If you have a describtion think about I am newbe! > > This is the first time for me trying this. Did you already discover the fine documentation we have for the M28EVK at [1] ? It is highly recommended to read this... [1] http://www.denx.de/wiki/view/DULG/Manual?stickboard=m28evk Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] Prof: So the American government went to IBM to come up with a data encryption standard and they came up with ... Student: EBCDIC! _______________________________________________ eldk mailing list [email protected] http://lists.denx.de/mailman/listinfo/eldk
