On Friday, May 29, 2015 at 02:48:14 PM, [email protected] wrote: > Hello,
Hi, > i failed to build the ELDK 5.6 with Xenomai support ( MACHINE=mpc5200 > bitbake core-image-minimal-xenomai ) > > I got an Error in Task 194: > git/eldk/meta-eldk/recipes-kernel/xenomai/linux-xenomai_3.14-ipipe.bb, > do_configure) failed with exit code '1' [...] > Hunk #2 succeeded at 2620 (offset 7 lines). > checking file mm/mmap.c.orig > checking file mm/mmu_context.c > checking file mm/mprotect.c > checking file mm/vmalloc.c > prepare-kernel.sh: Unable to patch kernel 3.14.43 with > ipipe-core-3.14.22-powerpc-4.patch. What I find a bit odd is that you're patching 3.14.43 . I think ELDK 5.6 was released with an earlier 3.14 kernel. Did you make some change in this department ? I think this is why you get patch failures (see your log for FAILED keyword) and why the recipe fails. > WARNING: > /opt/eldk/build/mpc5200_xeno-2014-11-19-8346b82/tmp/work/mpc5200-linux/lin > ux-xenomai/3.14-ipipe-r2/temp/run.do_configure.13404:1 exit 2 from > /opt/eldk/build/mpc5200_xeno-2014-11-19-8346b82/tmp/work-shared/xenomai-26 > .4/xenomai-2.6.4/scripts/prepare-kernel.sh --arch=powerpc > --adeos=/opt/eldk/build/mpc5200_xeno-2014-11-19-8346b82/tmp/work-shared/xe > nomai-2.6.4/xenomai-2.6.4/ksrc/arch/powerpc/patches/*ipipe*3.14*powerpc*.pa > tch > --linux=/opt/eldk/build/mpc5200_xeno-2014-11-19-8346b82/tmp/work/mpc5200-l > inux/linux-xenomai/3.14-ipipe-r2/git [...] Best regards, Marek Vasut _______________________________________________ eldk mailing list [email protected] http://lists.denx.de/mailman/listinfo/eldk
