http://www.denx-cs.de/doku/?q=mcvbootoptions
Page references to resistors RefDes. But where can I find schematic or
position of this components?
http://www.denx-cs.de/doku/?q=mcvevkbuildinguboot
3. Installation of U-Boot and U-Boot SPL to eMMC
The default boot media for MCVEVK is eMMC, but this setup can be
overriden by followingdocumentation
<http://www.denx-cs.de/doku/?q=node/232>.
link is incorrect. It is link to the page with M53EVK
Where can I find information on booting from SD-card?
http://www.denx-cs.de/doku/?q=mcvbuildingrecoverysoftware
2. Build recovery Quartus II project
*$ git clone https://gitlab.denx.de:2443/marex/mcvevk.git
*
link is incorrect
Where can I find Recovery-C2 project?
http://www.denx-cs.de/doku/?q=mcveckgpio
7.3.6 Pin Header
Three 40 pin pin header provide IO Pins of MCV.
I see two 80-pin PLD-like connectors.
Is this page suitable for my board?
_______________________________________________
eldk mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/eldk
