Hi Joe,
After sending "TT1;", any decoded text (TX or RX, at the K3) is
streamed to the terminal without request commands. The user (or
software application) can continue to send commands to the radio
completely transparent to the text stream as long as the command
doesn't return anything (e.g., an "UP;" command to move the VFO one
unit, etc.). If the application needs to send command that returns a
string, it can optionally send "TT0;" to suspend the stream
temporarily, or it can attempt to parse the returned string from the
stream.
We may tweak this behavior in the future. If so, it'll be documented in
the K3 Programmer's Reference.
73,
Wayne
N6KR
On Nov 7, 2007, at 8:06 AM, Joe Subich, W4TV wrote:
Wayne,
How is the data returned if TT1: is enabled? Is the CAT
function disabled and the port turned into a pure terminal
output or is the received/decoded data returned in
"chunks" within a "TT" report (e.g. TT[a string of N characters];)?
73,
... Joe, W4TV
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of wayne burdick
Sent: Tuesday, November 06, 2007 9:13 PM
To: Doug Person
Cc: [email protected]
Subject: Re: [Elecraft] K3: An Observation for Struggling
Brass-Pounders
On Nov 6, 2007, at 6:02 PM, Doug Person wrote:
I'm curious - does the K3 send the decoded text through the serial
port where it might be displayed in a terminal program?
Doug -- K0DXV
Yes. There's no third-party software support to do this yet, but all
you have to do is run a terminal emulator program on the PC,
then send
"TT1;" to the K3 (this turns on text-to-terminal). You can
receive CW,
FSK, and PSK31 this way. To transmit, you can send small
packets using
the Key command, e.g. "KY CQ DE N6KR K;".
The K3 Utility program, which includes our download, will include an
ASCII terminal that does all this for you at some point.
For further details see the K3 Programmer's Reference,
available on our
K3 page.
73,
Wayne
N6KR
---
http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
---
http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
