I've found that using the frequency calibration method in which you switch between LSB/USB when monitoring the tone (tuning for the point at which there is the least difference in the WWV tone between LSB and USB) on WWV at 15 or 20 MHz works very well on my Kenwood TS-930S. Given the fact that the K2 has independent BFO settings for LSB/USB, can this method be accurately used to check the K2's display frequency against WWV?
Thanks, Michael N9BDF PS The "Amateur Radio Emergency Communications Consistency Act" (HR 1478) and the "Amateur Radio Spectrum Protection Act" (HR 713 & S. 537) are in Congress. Please contact your Congressmen to ask for their support of these bills! See the following ARRL link for details: http://www.arrl.org/govrelations/ <http://www.arrl.org/govrelations/> _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
