Now, after a little technical briefing by Tom N0SS and Gary AB7MY
(thanks),
There are my K2 power output results using the DL1 dummy load when
applying the formula written in the build sheet of the DL1 and my VMM
set to DC.
BAND Power set on K2 @ 5W Power set on K2 @ 10W
160M (1.9 Mhz) 5.2W 10.9W
80M (3.750 Mhz) 5.3W 10.8W
40M (7.070 Mhz) 5.5W 11.0W
20M (14.100 Mhz) 4.5W 9.5W
15M (21.200 Mhz) 4.9W 9.3W
10M (28.500 Mhz) 4.3W 8.6W
Is it these values are in the average with most builders ???
===============================================
Jean-François Ménard / VA2VYZ
[EMAIL PROTECTED]
Elecraft K2 #4130
Amateur Radio Club of Sherbrooke, Quebec, Canada
Web site: http://homepage.mac.com/jfmenard
===============================================
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft Help:
http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
