Hi Bart, I built 7 K2s in the past. I would prefer the following sequence out of my own personal preference:
1. k2 noise blanker - it is the easiest to build. 2. k2 160m & 2nd antenna option - again it is easy to build 3. k2 internal battery operation - you can use battery to operate the rig without going to an external power supply when you do the tests 4. k2 SSB option - it is difficult than the above but give you an additional mode of operation 5. k2 rs 232, k2 audio filter and k2 antenna tuner - I put them the last because I can operate the rig even without them. Anyway, there is no fix rules in the sequence because the beauty of K2 is that you can add most of the options at any time as you wish. 73 Johnny Siu VR2XMC ----- Original Message ----- From: "PE3BB" <[EMAIL PROTECTED]> To: <elecraft@mailman.qth.net> Sent: Saturday, August 14, 2004 3:38 PM Subject: [Elecraft] Recommended sequence for adding options > Hi all, > > I started to build the K2. Can anyone recommend a sequence for adding the > options: > - k2 noise blanker > - k2 SSB > - k2 rs232-i/o option > - k2 Audio filter and RTC > - k2 antenna tuner > - k2 160m & 2nd antenna option > - k2 internal battery option? > > I appreciate all input. > > best 73, > Bart PE3BB _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
