Stewart:
To be honest I had not even considered that. I have my KPA100 installed
with the KAT100 in an EC2 case.
Looking at the clearance left by the KPA100 in the EC2 case I doubt that
there is enough head room above the KSB2 if the amplifier were mounted in
the K2.
There are precious few spaces left to put anything. I need my VOX to work
the way I want, so compromises must be made. I guess the solution could be
done in SMD, but that's rather against the K2 ethic.
Actually, I suspect there are a number of folks out there clamoring to try
SMD assembly. Possibly, this could be a small enough project that they
might JUMP at it.
I suspect the project won't be of much use to nearly as many others, if it
can't be somehow implemented in all K2s...
Cheers,
Tom N0SS
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
