I think icom rigs has an output to the tuner that has a special voltage for each band. E.g one value for each. I think it should be possible if you had an interface that recognice K2 band and set that voltage output to the tuner. I think I saw the schematics in ARRL handbook some years ago. (or was it a designe to decode value into auto antennaswitch?) And you need tune button.
Also I think this could be done manually , but easy to forget to switch bands. Bottom line...The tuner needs to know witch band it is tuning. Someone out there may have the values or you could meassure your own icom rig to find right value to right band and design a circuit. But look through ARRL handbook. If you solve this , let us know. Tom LA1PHA ----- Original Message ----- From: "Philip Westover" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Sunday, September 05, 2004 4:38 PM Subject: [Elecraft] AH-4 Tuner > Howdy! > > I was hoping there might be an Icom AH-4 Antenna Tuner > expert out there who maybe knows a good way to remote the > tuner with a non-Icom rig, such as a K2. (If you are > familiar with the > AH-4, it has a 4-conductor control wire system that > integrates it nicely with most newer Icom rigs, and works > well with end-fed antennas.) > > I've had my AH-4 around for awhile, mainly for a field setup > I've been using > (one of those newer Icom rigs), but I now have improved my > home station's > random wire antenna, and I'd like to try out the AH-4 on it, > with several other non-Icom rigs, including the K2. > > Has someone done this, or can someone think of a way to do > it? > > 73, > Phil, WA7URV > > > > _______________________________________________ > Elecraft mailing list > Post to: [email protected] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
