sorry about that I worded that question wrong, here is the question in a different way.
when I go to menu, the menu screen is not the same as in the back of the book for example BAT comes up bae when I look for RPT it comes up as rPe when I look for STP it comes up SeP is this correct for this programmed chip the reason I ask is because the first chip I had was by mistake sent to me un programmed and had to be returned to company. so I am not sure if its NOW correctly giving the right output. Where are the suggested settings, I understand the battery reading being kept at 9 volts or even a little lower but what is best for the other settings ... because I do not get anything from the audio from either band ... ----- Original Message ----- From: "John Mahon" <[EMAIL PROTECTED]> To: "MC Carpenter" <[EMAIL PROTECTED]> Cc: <[email protected]> Sent: Wednesday, September 22, 2004 11:50 PM Subject: Re: [Elecraft] low bat KX1 > MC, > The low battery voltage value can be set in one of the menus. > Maybe you have yours set too high? > I have my rig set for 7.5V and I don't get a low battery warning until > it drops to that value. > Good luck. > John N2YC > KX1 336 > > MC Carpenter wrote: > > >even with new batteries the low bat come up is this a adjustment problem or is a component not of the correct value > >_______________________________________________ > >Elecraft mailing list > >Post to: [email protected] > >You must be a subscriber to post to the list. > >Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft > >Help: http://mailman.qth.net/subscribers.htm > >Elecraft web page: http://www.elecraft.com > > > > > > > > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
