Re: [Elecraft] Missing some "dits" and "dahs" thanks all !

Fri, 1 Oct 2004 11:30:16 -0700 

Is that what makes working Multnomah County so special?  :)
   73,
      Kevin.   KD5ONS
On Thu, 30 Sep 2004 23:15:10 -0700, Ken K7ZUM <[EMAIL PROTECTED]> wrote: 



Thanks to all who answered my initial question about missing a few dits,
and now I know that it is "normal"  with an easy work around,
now I'll use a single "dah" (instead of "dits") seems to bring the power 
up
almost immediate.
and btw, Ron, you would not belive what kind of weird neo-geo-gravitational 
wiz bang super duper electron charged flux we gots going on over here in
East County !!

73 de K7ZUM
Ken in Gres"HAM"  Ore






Hi All,

       After a few months delay of ignoring my K2, I finally got back to
putting
the audio board, keying mod and new firmware in, and have noticed what I
think is a new problem for me, (not sure if it wasn't there before)
When in CW mode, (have the 100 watt pa board) and I first key up, 
I get nothing out, seems to take about 2 to 3 dits before power comes up,
after that, all is fine, If I change bands, the same thing happens, go back 
to
the previous band, its the same, 2 to 3 dits, power comes up, have noticed, that usually on the 2 or third dit, it only comes up to maybe 20-30 watts, 
then full 100 watts, this does not seem normal, did I forget to turn
something
on ? or off ??  anybody else come across this ???



73 de K7ZUM
Ken in Gres"HAM"  Ore

_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft 
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com




--
_______________________________________________ 
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm 
Elecraft web page: http://www.elecraft.com

Reply via email to