Ward,
The number of turns will be the same with any guage wire. The REAL question
is - will that many turns fit on the toroid core? In particular, I would
believe you could use #26 wire on SSB T2 with only a bit more care to lay
the turns straight - the FT37 -xx cores should allow up to 33 turns in a
single layer.
73,
Don W3FPR
----- Original Message -----
Today I decided to rewind T2 on my SSB adapter in an effort to correct my
low signal level -- even though it looked fine and beeped-out well and
yadda yadda.
Anyway, I have LOTS of #26 wire left over from the K2 and KPA100. Any
reason I can't use that instead of #28 to do this? (Is the difference
enough to drop a turn or something?)
Thanks,
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
