Hi ,
Just been fault finding a K2 for a chap here. the problem was no V
bias-xfil , so the filters couldn't be set. Nothing appeared to be coming
out of U10 on the Control board, and resistance values around it seemed
odd, so I gave the IC the chop. The resistances were still strange
....impossible in fact, and it appeared that both RP2 and RP3 might be
crook. Something that sounded too strange to be true. I took out RP2 ( 82k)
. Better, but still had strange readings, so out comes RP3 ( 47k) and the
readings looked like what one would expect with all the components removed!!
Metering RP3 showed it was not 5 individual resistances. They were all
joined together and ranged in resistance from 93k to 41k. In fact I was
getting a reading of 90k from pin 1 to pin 10......no wonder the poor old (
now deceased) U10 was not functioning.
Has anyone else been fooled by a crook RP?? It sure had me bluffed for a
while......
Incidently......RP2 was fine....but has rather short legs now...
Cheers.......Ron ZL1TW
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
