I am shortly about to start construction of an Elecraft K1.
I note the warnings given in the assembly manual about using the wrong
type of solder. Thing is, I am an old timer and it is quite a long time
since I built anything like this. In the past I have used multicore
solder with a 60% tin and 40% lead mixture.
I gather that these days, due to the effects of lead, it is/has now
being phased out from solder. I just bought a brand now roll of 'lead
free' solder. The stated composition of this solder is Ag 4%, Sn95.5%
and Cu 0.5%. I have tried making a few joints and other than it seeming
to have a slightly higher melting point than the older types, it seems fine.
Will this new solder composition be OK for constructing the K1.
Sorry if this is a dumb question but I have been out of the building
business for quite a few years.
Regards,
JB.
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
