Hi Sorry but after measuring on my K2/100 and one of my transverters that are in the same case as the KAT100-1 It appears the KPA100 is too big to fit into an EC-1.5. It looks like the only option is to mount the KPA100 into the EC-2 even if Elecraft made the EC-1.5 available.
Don Brown ----- Original Message ----- From: Tom Althoff<mailto:[EMAIL PROTECTED]> To: [email protected]<mailto:[email protected]> Sent: Tuesday, November 09, 2004 7:25 AM Subject: [Elecraft] EC-1.5...is there a half height EC-2 on the horizon? There's been mention in the archives of a so-called "EC-1.5" possibly being made available. I'm mainly interested in the KPA-100 to drive my KW but don't want to keep swapping covers or have to buy the KAT100-2 just to drive the amp input. The smaller cabinet would still allow me to mount just the KPA-100 and set it on top of the K2 for fixed use and just unplug it and take out the K2 for portable. Is such a cabinet in the works? 73 de Tom K2TA _______________________________________________ Elecraft mailing list Post to: [email protected]<mailto:[email protected]> You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft<http://mailman.qth.net/mailman/listinfo/elecraft> Help: http://mailman.qth.net/subscribers.htm<http://mailman.qth.net/subscribershtm> Elecraft web page: http://www.elecraft.com<http://www.elecraft.com/> _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
