I would take out the 60m option and try again!
Just to rule out that card.
OR??? Is secondary menu for d19 set?
Orientation for d19?
Tom LA1PHA
----- Original Message -----
From: "Ian J Maude" <[EMAIL PROTECTED]>
To: "Elecraft" <[email protected]>
Sent: Wednesday, November 10, 2004 10:06 PM
Subject: [Elecraft] OK, I broke it!
Hi all,
I fitted the 160m and 60m boards today in my K2 #4044. I decided
(famous last words) that I should only take the heatsink off once so I
did both mods together.
Anyhow, the bands exist and no smoke was let out. However, I set the K2
to 2 watts, put it into tune and zip. Nothing out. I checked and lo
and behold, 8v on R31. I cannot alter the VCO voltage. Have I fried
something or any hints on where to look please.
Cheers
Ian
--
Ian Maude G0VGS Morecambe Lancs UK | [EMAIL PROTECTED]
Sysop of GB7MBC, the Morecambe Bay Cluster
Running Linux and DXSpider | K2 #4044
Find out about Summits on the Air!
Visit the SOTA web site at http://www.sota.org.uk
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
