I thought this problem was related to the T/R switching problem I was having and fixed (a no solder joint), but apparently I though that because I first noticed that failure on 80 meters.
So I brought it into work today, and when I hooked it up to a service monitor and put a signal into it - no problem. Damn! I hate intermittent. I took the covers and the PA off and poked around. Looked particularly at the band-pass and low-pass filters ad specifically around K2, K3 & K8. Also looked around K13 in the VCO - but I don't think that is where the problem is as it appeared to transmit - at least the KAT100 indicated 20 watts, and since I don't have the 60M kit in, that relay is also common to 40 and 40 was working fine (I believe 30 was also, so that kinda eliminates K3). I have cycled through the bands, no problem. It has been sitting on the bench for an hour now with a signal into it working fine. Any ideas? Am I missing something? It would be a LOT easier to find the problem if it was broken. Don _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
