Has anyone who experienced oscillation with their KPA-100 (internally or externally mounted) seen a spur about 1Khz up from the main signal?
If I crank up my power to 100W a very "brrrrrippy" spur pops up just above my signal only on 160M. If I keep the power at 95W or less it is not there. I do not hear it in my external rx when the amp is bypassed. I keep it at the 90W level if I am operating barefoot on 160M of course but if this is not normal or never before seen then I'd be tempted to look into a wiring error in the PA. I eventually want to wire the PA externally. Elecraft recommends troubleshooting the KPA-100 while it is mounted in the K2 so I'd like to clean this up before extending the PA away from the K2 and a new can of worms gets opened. 73 de Tom K2TA _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
