Hi One more thing to check is the trimmers. Did you mix up the trimmers. the ones for the 17 meters do NOT have a red dot on them. The trimmers for 20 meters have a red dot. If you mixed up one or more of them you could have this symptom. It is also possible that the VCO is running a the wrong frequency due to a bad solder joint or wrong cap in the or around the VCO relay area. I had a K2 with a high current on one band problem that turned out to be the VCO running at the wrong frequency.
Don Brown KD5NDB ----- Original Message ----- From: W3FPR - Don Wilhelm<mailto:[EMAIL PROTECTED]> To: [EMAIL PROTECTED]<mailto:[EMAIL PROTECTED]> ; [email protected]<mailto:[email protected]> Sent: Monday, December 06, 2004 9:01 AM Subject: Re: [Elecraft] Hi Cur, low power on 17m The only thing that is unique to 17 meters and not used on another band is the VCO and the bandpass trimmers C32 and C34. <SNIP> _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
