On Tue, 2004-07-12 at 01:00 -0500, Web Williams wrote: > I also purchased the SSB module to go with my K2. Everything > seemed to set up correctly. It made all the right sounds, all the > right numbers show up on the display, etc. It decodes SSB signals > fine. The problem I'm having is that when I key the microphone, > I get full-power carrier on my external wattmeter. CW works fine. > I'm using a Yaesu MH-31 hand microphone, and wired the > internal jumpers on the front panel board per the manual. Anyone > have any idea what may be going on or what to look for? This is > the basic 10-watt K2 with only the SSB module added.
When you install the KSB2 in the K2, there is a capacitor and two jumpers that need to be removed. Did you skip that step? It's easy to miss it in the excitement of installing a new option. I did, and I had the same symptoms. -- 73, Brian VE7NGR _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
