Merlin -
Like others, I would like to see pictures and any other information on this
project.
I have found that I get distorted audio when transmitting SSB if the data cable
between the K2 and KPA100 happens to fall near the KSB2. I even get some RF on
my CW signal. I believe your solution would be much more effective than my
efforts to shove the cable out of the way.
73 de NA8M
John
Enough reminiscing; I just spent about a hour with my KSB2, making sure
that the solder connections near the 7 pole filter were filed down, or
clipped
as much as possible, so that they don't act as little "antennas", thus
messing
up the characteristics of the filter. It worked! The "audio image" that
one hears when tuning past zero beat got a lot weaker!
Next, I went to local hobby shop and bought some tin. I made little tin
"houses" which I placed around the matching toroids, ground them carefully.
It
worked too. Next I added a little tin "fence" which went on the bottom the
board, shielding the input of the filter from the output. It worked. Three
times is a charm!
73,
Merlin W3ICT
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
