Greetings folks:
Thanks to Nigel Hayton, ZL2DF, I have just posted to my web site at
www.n0ss.net
an article which described Nigel's efforts to reduce the not insignificant
switching spurs he was experiencing from his Samlex 1223 power supply.
Basically, Nigel, with only a couple additions to the output circuitry of
the PSU, was able to reduce his 160M birdies from the S-9 level to a level
of S-1 to S-2... a pretty significant reduction, for a small investment.
The PDF of this article can be found about 1/3 of the way down my rambling
home page, just below the photo of the Samlex 1223.
If you happen to have a Samlex 1223, you might also be interested in some
service info for this power supply which can be found at the same location
on my home page. The schematic which came from Samlex, was pretty shoddy,
and after many photocopyings had become pretty difficult to read. I have
now included an newly re-drawn copy of the schematic, along with the
original copy I received. I hope you will find the new schematic a bit
easier to work with.
Enjoy.
73, and MANY thanks to Nigel for sharing his success with us.
Tom Hammond N0SS
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
