Pleased to report that #04554 is going well.
I now have installed four options: KNB2, KDSP2, K160RX AND KSB2. Everything went pretty smoothly. With the exception of the KSB2, everything worked according to hoyle right off the bat. The KSB2 unit would not communicate with the main processor. I went back and checked and found I had forgotten to finish soldering in the P1 connector. I had carefully rechecked the bottom of the board but forgot to go back through the top. A few dabs of solder on the remaining pins and # 04554 was off to the races. Next option to install is the 60 meter module. That does not look too complicated. I now have a question: I plan to eventually go for the 100 watt option, but not right away. Can you use the 100 watt antenna tuner in the QRP version or do you have to have the 100 watt unit installed first? . _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
