Hi to all and season's greetings. I am in the process of building my K2/100, and have almost finished the RF board of the basic kit. Went through the alignment parts I and II with no problem but have a question regarding 1 reading:
1) During the AGC threshold adjustment (control board) the instructions call for adjustment of the potentiometer R1 until the voltage at the lead# 5 of U2 reaches 3.80V. In my case, the voltage can go to a max value of 3.78V with the R1 being fully counterclockwise. Since the difference is only .2V from the required value, I do not really know if this finding has any importance or needs to be addressed. Any advice would be greatly appreciated. Marinos ki4gin _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
