Chuck,
I believe you will find the information in the K2 Dial Calibration article
on my website useful - www.qsl.net/w3fpr. That article contains information
both on setting the 4 MHz reference and setting the filters/BFOs. There are
links ot other resources within the article.
73,
Don W3FPR
----- Original Message -----
With my last few days of vacation time remaining, I decided to do one of
those
"I'll do it later projects".
Inspired by my shiny new Heil mic, I thought I'd visit all my filter
calibrations and settings, as it hasn't been done since the original
build.
I've been to the Tech Notes page and saw Tom Hammond's updated procedures,
as
well as the one using a spreadsheet.
So I'm asking you guys that have done this a lot and those who have done
it
recently.........
Should I use another procedure besides those posted?
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
