Hi Tom!
I confirm your birdie on 28020.
I have a birdie at 28019,27 cw and cwr falling slightly during warmup.
Since I know that you have a K2/100 and none of the others that answered you
I can confirm that the birdie is from KPA100.
If you turn power down to 10watts or less the birdie goes away.
I also think that you will find a birdie at 28265 +/- that slightly changes
when toggling between 10/11 watts.
Also reason to think KPA100 is the source.
It stands something in the manual for KPA100 that 4Mhz osc. can be finetuned
to raise the 4Mhz so it lays outside USA 75meter , but nothing mentioned
about 10 meter.
My 28019 birdie does not light up the smeter and is quite narrow so during
normal qso it does not bother to much. It's about 50-60 hz wide.
Maybee Elecraft can help more on this.
Have a happy new year 2k5.
Tom LA1PHA K2/100 3829
----- Original Message -----
From: "Tom Althoff" <[EMAIL PROTECTED]>
To: "Elecraft" <elecraft@mailman.qth.net>
Sent: Saturday, January 01, 2005 11:25 AM
Subject: [Elecraft] Birdy on 28020 with K2?
I'm getting a birdy near 28.020MHz with my K2/100. Is there anything that
can be done to eliminate this or move it a few kHz?
Tom K2TA
K2 #1117
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
