I have a question concerning the KPA-100 and temperature issues. Took the rig to VP2VVV during cq ww cw contest in Nov. Ambient shack temp was between 70 and 85 degrees F.
We were running big pileups @40 wpm during late afternoon on Sat and boy did the top of the rig get hot! Later that evening when tempo slowed down, was doing S&P on 80 and 40 and had one last big run around 11pm. Shut the rig down for some sleep and other op got up around 2am and rig would not auto tune (using long wire thru KAT-100) and he could only run rig below 10w. That pretty much shut us down til I got up and hooked up spare FT897 but by then we had picked up some knarly line noise and we pulled the plug and played watersports w/YLs. At first I thought that I had not effectively tightened down the PA thermal pads but after sending email to Mr. Don, W3FPR, he suggested looking at the CALtPA. I found that it had "reset" itself to 255C! Once I set the temp to 30C, everything worked fine. My question is: Why did the rig jump up to 255C? Any thoughts and has anyone else experienced the same thing? 73 Tom K6CT _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
