Hoping I can get some advice from some other owners on this I've run into an INFO232 message when trying to run the CAL PLL for the 160 meter module.
The manual for the 160 module gives advice on INFO 231 and 235 but not on INFO 232 Up to this point all checks appeared to be ok. I do have a note in my owners manual to the effect that if INFO 232 shows up during CAL PLL make sure that the counter is on TP1 (it is) and that 40M is selected. The 160 meter manual says to set @ 1800.1 kHz and run the CAL PLL. I'm hoping someone else has had this experience and provide some info. BTW the module is working on receive for sure - I'm able to receive a 1530 AM broadcast station and the frequency display is 1530.00 kHz Thanks Lars WB2ORD _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
