Not a problem Sandy. I will also sent this to the group. The problem seemed to be in the calibrating the transmit offset was the reason the transmit was off. The receive calibration about was right on.
I took the K1 over to Jim - K4ZM - house today and we (he) used his test equip to get the alignment right on. We found an intermittent 18.100 crystal that was causing the problem on 30 meters. Replaced it, and it's now working good on 30 meters. When I did the test below the crystal was working, but later it wouldn't work. Once when Jim was testing it, the crystal worked, then it wouldn't work so he replaced it. Jim checked the receiver sensitivity at .1 microvolt and you could still hear the test signal good enough to copy. I was impressed at how good the receiver is on the K1. Thanks to all for the help. _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
