Dave Does the K2 jump frquency only at that one spot, or about every 5 kHz across the band? If the latter, it may be you need to do the CAL PLL routine. I just went through that to reduce the click when crossing over the PLL 5kHz boundaries. Tom Hammond put me on to this, and it seems to have worked for me. A good procedure is written upon W3FPR's web page. Good luck and 73 Bob N6WG
> Hello folks: > > My K2 has developed a problem where the frequency seems to jump or skip about > .5 > kHz when tuning across the bands. For instance, when tuning from 14056.34 to > 14056.35, the beat note from CW stations suddenly jumps about 500 Hz. It > does > it on other bands and frequencies and is repeatable from one day to the next. > > The digital frequency display looks and acts normal. > > Any ideas? > > David Bixler W0CH > Seneca, MO > > > _______________________________________________ > Elecraft mailing list > Post to: [email protected] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
