Hi Tom, Im hoping that you are still awake .
Ive just completed building the CW tuning indicator. All has gone reasonably well and I am now at the alignment stage. The problem Im having here is exactly the reason why I need the tuning indicator ie difficultly recognising when the two tones are beating together but I need to be able to do this to align the indicator! I have the feeling that I should be able to use Spectrogram to align the indicator. I imagine that what I would do is turn SPOT on and tune the 4.000 MHz birdy until SPOT and the birdy where on top of each other. Once this occurs I can then adjust the tuning indicator trimpot until the 10th LED comes on brightly and then finess this by setting the trimpot to the middle of the trimpot range where the 10th LED is lit. Does this make sense to you. If not, how do I adjust the proposed procedure? Mike VK1KCK K2 #2599 _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
