Eric Swartz - WA6HHQ, Elecraft said: > Hi Brendan, > > A couple of questions: > > 1. Were you using the new V1.2 download hex files from the web page? If > not, and you were using earlier ones sent out by Jack, they will have > too many records and can cause this error.
I am using the Hex file from the website > 2. The blinking LED indicates a bad record was received by the KRC2. Did > you try repeating the download after restarting the KRC2? yes > 3. If you restart the KRC2 and query the version number now, what > version do you get? 1.0 > 73, Eric WA6HHQ > ---- > > Brendan Minish wrote: >> Anybody else having difficulty with this firmware upgrade? >> >> the utility installed correctly >> With the DL switch set I can query the KRC2 and get the following >> response >> ;KR00;KR73;KRV;KRV KRC2 V1.0; >> >> when I try to upload the firmware I get an error after which time I have >> to power cycle the krc2 before it will respond to queries again >> >> KRC failed to reply check KRC2 power, DL switch RS232 cable and com port >> ;KR00;KR73;KRU; the KRC2 indicator led flashes about 1 per second >> >> I am running windows 2000 on a fairly modern PC and the com port is a >> real >> hardware one (not a USB adapter) >> I have tried with the krc2 powered by the K2 and with the KRC2 powered >> directly with no K2 connected. >> >> any Ideas? >> -- >> Brendan Minish Ei6IZ > -- Brendan EI6IZ _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
