Jerry, See page 18 of the KAT2 manual (and the chart on page 21) for the full details, but the 'CALS' setting will bypass the matching network and I believe that is what you want to accomplish.
73, Don W3FPR > -----Original Message----- > > I am disappointed that I received no reply to my query re the KAT2. > Perhaps I did not ask the question clearly. > > I would like to read the UNMATCHED Forward and Reflected power on > the antenna. This information would help me trim the antenna to > resonance. I think that I can see the UNMATCHED reading by > putting the ATU in the POUT mode. Is that correct? > > I don't find this question addressed in the KAT2 construction > manual but feel that at one time I have read it somewhere. > > Jerry/k6iii > San Jose, CA > > > ============================================ > > Is it correct that with the KAT2 set to read Pout, that I am > reading the true > forward and reflected values from the match and not the ATU > Corrected match? > > I want to be able to read the Unmatched SWR. > > Jerry/k6iii > San Jose, CA > K2 s/n 500 > _______________________________________________ _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
