Hello,
I would like to thank everyone for responding. Unfortunately, I still
do not have this problem solved. Very frustrating! After some more
poking around, here is what I can say about this. It only happens when
I press 'Menu', not when pressing 'Display'. It is intermittent,
although it happens more often than not. After pressing 'NB', it seems
to go away for a while. I have checked all my soldering on each board.
I could not find any solder bridges anywhere, nor any globs of solder
not on a pad. I checked the direction of all diodes and the are all
correct. Hmmmm...
Thanks,
Chris KC9GSV
On Feb 1, 2005, at 11:21 PM, Dale Wiese wrote:
Chris,
It was a while back, but I think I had this same issue. The problem
turned out to be a diode installed backwards on the control board.
73,
Dale, N9XD
On Jan 31, 2005, at 5:43 PM, Christian Adamec wrote:
Hello,
Well, I got up to the power on test for K2 #4718 and it worked! Very
exciting. Prior to this, the only electronics that I had built were
Elecraft's noise generator and test oscilator, which I plan to use
with the K2.
The issue, though, is that when I tap the menu button or the display
button, "not inst" will flash for a second before the menu is
displayed. All tests checked out after power up, except the keyer,
since I don't have a paddle. Let me add that at this point, I am
missing one pushbutton switch, S16, which I am waiting on a
replacement for.
Is this message a problem or something to worry about? Like I said,
everything seems to be working just fine, except for this message
that flashes occaisionally. I couldn't find anything in the manual
regarding this.
Thanks,
Chris KC9GSV
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
