I just went through the process and I wouldn't worry about it. The kits are well designed and options go in pretty easily.
On page 71 of the K2 manual (download from elecraft) you can see the steps you would be able to save. Look at the "Installation" sections of the option manuals (also downloadable) to see what you have to undo. If you wait a long time to order options there may be a firmware upgrade required. Keith Regli (K7KAR) mailto:[EMAIL PROTECTED] http://www.kregli.com -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Craig Rairdin Sent: Tuesday, February 08, 2005 9:01 AM To: [email protected] Subject: [Elecraft] Question about ordering K2 I'm going to order a K2 but am trying to spread the cost out over some period of time. Is there any advantage to ordering the K2 and the KPA100 at the same time? That is, am I going to run into places in the instructions for building the K2 where it would be advantageous to have the KPA100 kit right there? For example, are there parts in the basic K2 you have to remove when you add the KPA100, or use from the KPA100 kit if you have it? Same question as it applies to the KAT100-1. Craig _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
