The K1 manual makes a very, very brief mention of using an internally generated signal to calibrate the receiver. It seems to indicate this signal is at "99.7". With an antenna disconnected I hear a carrier that is definitely in the neighborhood of "99.7" on 40, 20, and 15M, but on 30M I don't hear it. OTOH, I set it up with 10.1 MHz as the low end of that band so maybe the signal is at 9997 KHz and that's why I'm not hearing it. So... am I understanding that this signal does exist and its purpose is to calibrate the receiver or am I not understanding the sentence fragment that mentions this signal? And is there something I can use on 30M? FYI the K1 is my only radio so I don't have anything to calibrate it against. Craig WB0GUU _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
