--- Gary Thomas <[EMAIL PROTECTED]> wrote: > Date: Sun, 13 Feb 2005 18:13:08 -0800 (PST) > From: Gary Thomas <[EMAIL PROTECTED]> > Subject: Sudden Loss of Power > To: [email protected] > > Recently completed k2 4524 and it worked like a > champ. > Recently fired it up and there was no output. Altho > the out put showed a constant .4 (point four) watts > > and could not be increased. Upon turning the rig > over > I discovered that a nut had fallen off one of the > finals heat sink. I removed the heat sink cover and > checked the voltages on Q7 and 8 which were ok. > However the emitter voltage on Q6 reads 1.6 instead > of > .4 and the base reads 1.2 instead of 1.1. > R 50 checks out ok... Any thoughts.? > > Thanks > gary ...aa1ue >
_______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
