-----Original Message----- The first step is to be sure that C70 and C71 in the VCO area have the shortest possible leads. Then the last step in that segment is to remove C70. This seems strange. Is this the same VCO C70 that we just snugged down in the first step? ----- The application note on http://www.elecraft.com/Apps/Alert11_WAOF.html sheds some light on it. It says
"C70 needs to have short leads and should be positioned close to D22. If necessary, remove C70 and scrape some of the ceramic coating from the leads of the cap so it can be installed very close to the PCB." Also, on rereading the A-B mod document, it really says "Try them in order, and stop when the symptom disappears." So the removal of C70 is only a last resort and is not necessarily required, it all depends on whether you have any instability left on 7185 kHz. 73 Sverre LA3ZA http://www.qsl.net/la3za/ _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com