Here is a good interface that will work with the k2 and sb200. Particulars at http://www.theheathkitshop.com/ampkeyer.html
----- Original Message ----- From: "Stan Rife" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Tuesday, March 08, 2005 7:29 PM Subject: RE: [Elecraft] k2 and sb-200 Dwight, I am going to use my SB-200 with the Elecraft. I have purchased an item called a "softkey" from Harbach Electronics. It is a board that mounts inside the SB-200 and essentially converts the high voltage keying line down to something the K2 can safely key. I haven't installed it yet...it requires a little rewiring to get it in the circuit. Trouble is, Harbach is shut down right now, I think due to a fire or something and Jeff is not taking any orders until he gets his place back in order. There are probably other options, but this is the one I chose because it designed specifically for, and wires in to, the circuitry of the SB-200. Stan Rife W5EWA Houston, TX K2 S/N 4216 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dwight Sent: Tuesday, March 08, 2005 9:17 PM To: [email protected] Subject: [Elecraft] k2 and sb-200 So has anyone using the k2/100 to drive a heathkit sb-200 linear? If so can you give me some pointers on the interface to the amp? Still being new to the hobby would like some advice on the subject... __________ Dwight AI4II __________ _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
