Tony, The Info 201 message tells me that the K2 'thought' that everything had to be initialized. The only thing I can think of is that AUXBUS communication was/is misbehaving. I would first drag out the schematic and look at everywhere the AUXBUS signal travels starting from the microprocessor.
73, Don W3FPR > -----Original Message----- > > Hi Guys, > K2 #4049 w/KPA100 + KAT100. Working without any problems for > almost a year. > Was running MMTTY @ 25 wts today. After returning to receive K2 locked > up, no audio not able to do anything. Turned it off and back on and all > was normal except could not access menu. Turned it off again and left it > for a couple of hours, turned back on and am getting info 201 then > ELECRAFT then 7100 plus some hum from speaker. > Where to check first when I open it up? > Thanks guys. > > Tony W7GO > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
